R-Pin Banger Kit - 30mm Full Set (with Coil)
Out of stock
R-Pin Banger Kit (30mm):
Your e-nail and/or coil may malfunction dangerously if the wiring order is not confirmed to match! Many e-nail controllers are wired differently (even though they look like they might match). If you are unsure, I can help you find out. Read this for more info.
- 30mm Axial coil
- Clear bottomed 30mm banger (14mm male joint)
- R-pin for installing your heat coil to your banger
- Terp bucket insert
- Bubble cap
- 100W/120V coil
- XLR 5-pin connector
- K-type TC’s
- Kevlar cord sheath is rip and shear resistant
- The wiring order of this coil: pin1=AC, pin2=AC, pin3=TC+, pin4=TC-, pin5=GND
If you don’t know for sure the wiring order on pins 1-5 of your gear please first ask your controller seller for the pin configuration to match to this coil before purchasing. If for some reason you cannot get a response, ask me and I will see if we can figure it out together! Your e-nail will probably not work and likely even malfunction if the wiring order of the coil and controller do not match! It may look like the same size plug but some companies wire their e-nails differently to try to get proprietary exclusivity. If you do not know for sure how your e-nail or coil is wired, it is solely your responsibility to find out (how to here). Most e-nail sellers are responsive when you ask them. Just ask what the wiring configuration is on the 5-pin XLR plug. When you find it, please make sure it matches the listed configuration listed here.
If you have any questions don’t hesitate to use the contact page and send a quick message…
Here is a heat coil plug wiring guide, which is essential if you want to match different brands of enail gear. If you are looking for more information specifically about which enail accessories you should really check out this here guide!