RCCtools logo

Mini Nectar Set For Enail


Mini Nectar Set For Enail:

My mini nectar set is a handy way to make your enail setup more portable. Includes glass straw, holders, nectar coil, and nectar tip. This is the exact same as the nectar enail bundle, except without the enail.


  • Mini glass straw combines portability with a minimal filtration
  • Perfect amount of water filtration for those who like a stronger dab
  • Secured nail/tip keeps the heat coil from sliding off
  • Three glass “feet” to keep the glass from rolling on a flat surface
  • Ti nail/tip sits tight inside the ground glass joint
  • Even more secure with the included keck clip (;


  • Includes mini nectar collector straw, heat coil, Ti nail, glass-to-coil metal keck clip, & 3D printed base/stand
  • Metal keck clip to secure Ti nail to the glass
  • E-nail controller purchased separately (contact for combined shipping if your combo is not available)

Nectar Collector Coil Specs:

    Your e-nail and/or coil may malfunction if the wiring order is not confirmed to match! Many e-nail controllers are wired differently (even though they look like they line up. If you are unsure, I can help you find out. First, quickly look over this for more info.

  • 100W / 120V coil (will work on most controllers except some rare exceptions)
  • XLR 5-pin plug connector: pin1=AC, pin2=AC, pin3=TC+, pin4=TC-, pin5=GND
  • K-type heat coil thermocouple (standard)
  • Kevlar cord wrapping for rip and shear resistance


Out of stock

better product page
Conner Goertzen

Conner Goertzen

I am a DIY electronics enthusiast who has been 3D printing since 2018, making custom e-nail controllers since 2016, and putting together custom electronic instruments since 2011.