B-Stock 25mm Banger (pin-hole too high for coil)
B-Stock 25mm Banger (pin-hole too high for coil):
The supplier sent these slightly out of spec. The hole for the pin is just a smidge too high for the pin to pass through and mount the coil to the bottom. Alternatively you can of course still attach a coil with a band, twisted metal wire, or just use it with a torch setup if you happen to prefer.
You can actually still use it with an enail coil if you don’t mind that the pin will only catch or the coil on one side of the pin (see picture). The fit is still pretty tight but there may be more chance of breakage or slippage with the uneven leverage.
- 25mm outer diameter
- 14mm male joint to rig size
- Clear bottom