30mm Axial Banger E-Nail Heating Coil

The Wiring Order Is Important!

Your e-nail and/or coil may malfunction dangerously if the wiring order is not confirmed to match! Many e-nail controllers are wired differently (even though they look like they might match). If you are unsure, I can help you find out. Read this for more info.

  • 30mm axial barrel style banger heat coil with wraps on the bottom of the coil for direct lower surface heating
  • 100W/120V coil
  • XLR 5-pin connector
  • K-type TC’s
  • Kevlar cord sheath is rip and shear resistant
  • This is the wiring order of this coil: pin1=AC, pin2=AC, pin3=TC+, pin4=TC-, pin5=GND


Availability: In stock (can be backordered)

  • Options Price: $0.00
  • Product Price: $39.99
  • Total: $0.00

30mm axial coils vs. 25mm axial coils:

Which is better: a 25mm axial coil or a 30mm axial coil? It all depends on your setup and preferences. The main down-sides to going with the bigger coil are very few. One is that there is more mass, which takes slightly longer to get up to temperature and also can weigh down a very small rig (or “banger hanger“). This can be remedied in most cases by making sure that the e-nail coil is pointing back towards the rig instead of away from it (see pic).

This keeps the center of gravity balanced on your dab rig and will help prevent it from tipping. Another handy piece of gear that helps with this is a drop-down adapter. One more important thing: please make sure that your e-nail coil cord is not in a place where you might snag it! Cats and e-nails sometimes don’t mix. It’s up to you to decide whether you are too accident prone for an e-nail or are not able to create a safe environment for your setup to reside.


If you don’t know for sure the wiring order on pins 1-5 of your gear please first ask your controller seller for the pin configuration to match to this coil before purchasing. If for some reason you cannot get a response, ask me and I will  see if we can figure it out together! Your e-nail will probably not work and likely even malfunction if the wiring order of the coil and controller do not match! It may look like the same size plug but some companies wire their e-nails differently to try to get proprietary exclusivity.

If you do not know for sure how your e-nail or coil is wired, it is solely your responsibility to find out (how to here). Most e-nail sellers are responsive when you ask them. Just ask what the wiring configuration is on the 5-pin XLR plug. When you find it, please make sure it matches the listed configuration listed here.

Back to the Lobby

Are you finding what you need?

how can I improve the site to be more helpful?

What would you like to see?

suggestions Are welcome!