Triple E-Nail: 3D Printed Vertical Version

Triple E-Nail: 3D Printed Vertical Version

The triple e-nail is designed to allow for multiple PID controllers for multiple cartridge heaters or heat coils. Now you can press rosin while precision-heating your dab-rig for quality assurance sessions

Features and Specs:

  • Custom American dual e-nail controller with convenient & reliable electronic temperature control
  • Keeps your rosin plates heated with precise temperature ranges for consistency
  • Standard XLR output with custom wired plugs and adapters are easily possible for your cartridge heaters
  • High-wattage AC electronics are protected with a “fast-blow” fuse for safety
  • Made of sustainable PLA plastic material which is a by-product of the sugar industry. PLA is recyclable and even semi-compostable (if buried in soil for a few years or so).
  • Free 2-year warranty comes with each and every controller (see terms)
  • *Standard XLR heating coil pin configuration for this controller is: pin1=AC, pin2=AC, pin3=tc+, pin4=tc-, pin5=ground (where pin 1 starts at the 2-o’-clock position and 5 is at ten-o’-clock)


Availability: In stock

Pick Up to 3 Colors Using The Picker Field (Will Appear Below) -- Please Email With How Exact They Should Be, Thanks.
  • Options Price: $0.00
  • Product Price: $205.99
  • Total: $0.00

Care For 3D Printed Items

All 3D printed items must be handled with a reasonable level of care to avoid weakening and/or warping the structure. 3D FDM printing uses a layer-by-layer construction — as opposed to standard injection molding which has no layers but is one uniform piece. Any transport of 3D printed items requires sufficient padding and avoidance of stacking heavy objects on top of these items or around them without sufficient padding and/or bracing.

Please keep 3D printed items out of direct sunlight. Intense direct sunlight a very hot environment may result in slight warpage. Care should be taken to keep any 3D printed away from intense heat (over 90F) or the risk of warpage may increase. In most cases the warpage is very slight and hardly noticeable; but some caution is warranted regarding this.

Are you finding what you need?

how can I improve the site to be more helpful?

What would you like to see?

suggestions Are welcome!