Cotter Pin Fastened 30mm Banger (Only)

R-Pin Banger (Only) – 30mm

Coil wiring is important! Your e-nail and/or coil may malfunction dangerously if the wiring order is not confirmed to match! Many e-nail controllers are wired differently (even though they look like they might match). If you are unsure, I can help you find out. Read this for more info.


  • Clear bottom
  • 30mm outer diameter
  • 14mm male joint
  • 24mm inner diameter and 3mm Thick For 14mm version
  • R-pin for installing your heat coil to your banger


Out of stock

Coil Wiring Order Is Important!

Please first ask your controller seller if you don’t know for sure the wiring order on your gear. You want to do this before to make sure the setup will actually work. If for some reason you cannot get a response, ask me and I will see if we can figure it out together. When the wiring order of the coil and controller do not match, big problems occur! Your e-nail will probably not work and likely even malfunction if it does not match. It may look like the same size plug but some companies wire their enails differently to try to seem special and trick their customers.

Your Due Diligence

If you do not know for sure how your e-nail or coil is wired, it is solely your responsibility to find out. Most e-nail sellers are responsive when you ask them. Just ask what the wiring configuration is on the 5-pin XLR plug. When you find it, please make sure it matches the listed configuration listed here.

Questions Always Welcome

If you have any questions don’t hesitate to use the contact page and send a quick message. Here is a heat coil plug wiring guide, which is essential if you want to match different brands of enail gear. If you are looking for more information specifically about which enail accessories you should check this out. This dab gear accessories guide shows what’s involved in a full enail setup.

Pin Fastened Banger Safety

The pin fastened banger is probably the most secure option to hold your banger onto a heat coil. Other options such as the bands are also very secure, but may not hold well onto bangers with certain neck shapes. The pin below the bucket ensures that you always have a tight coil fit on the bottom of the bucket. If you have any gaps, it’s very easy to bend the pin into a v-shape to tighten the holding force.

Back to the Lobby

Helpful General Enail Info.

Are you finding what you need?

how can I improve the site to be more helpful?

What would you like to see?

suggestions Are welcome!