25mm Banger w/ Cotter Pin Fastener (Only)
25mm R-Pin Banger:
- R-pin for holding your heat coil to your banger
- Clear bottom
- 18mm or 14mm male joint size to your dab rig
- 25mm outer diameter
- 20mm Inner Diameter
Availability: In stock
Coil Wiring Order Is Important!
Please first ask your controller seller if you don’t know for sure the wiring order on your gear. You want to do this before to make sure the setup will actually work. If for some reason you cannot get a response, ask me and I will see if we can figure it out together. When the wiring order of the coil and controller do not match, big problems occur! Your e-nail will probably not work and likely even malfunction if it does not match. It may look like the same size plug but some companies wire their enails differently to try to seem special and trick their customers.
Your Due Diligence
If you do not know for sure how your e-nail or coil is wired, it is solely your responsibility to find out. Most e-nail sellers are responsive when you ask them. Just ask what the wiring configuration is on the 5-pin XLR plug. When you find it, please make sure it matches the listed configuration listed here.
Questions Always Welcome
If you have any questions don’t hesitate to use the contact page and send a quick message. Here is a heat coil plug wiring guide, which is essential if you want to match different brands of enail gear. If you are looking for more information specifically about which enail accessories you should check this out. This dab gear accessories guide shows what’s involved in a full enail setup.
Pin Fastened Banger Safety
The pin fastened banger is probably the most secure option to hold your banger onto a heat coil. Other options such as the bands are also very secure, but may not hold well onto bangers with certain neck shapes. The pin below the bucket ensures that you always have a tight coil fit on the bottom of the bucket. If you have any gaps, it’s very easy to bend the pin into a v-shape to tighten the holding force.