25mm Fat Lip Beveled Banger Kit (Coil, Banger, Capper, Insert)

25mm Fat Lip Beveled Banger Kit (Coil, Banger, Capper, Insert)

Important: the plug on this coil is wired in this order: pin1=AC, pin2=AC, pin3=TC+, pin4=TC-, pin5=GND
Heat coil and controller must match or they will not work! Some e nail controllers are wired different to try to get you to purchase replacements from them only. If you are unsure, I can help you out. Please first check this info. out and/or contact the maker of your other gear to find out the order before purchasing.

Includes:

  • 25mm Axial coil
  • 25mm Fat Lip beveled banger (14mm male joint)
  • Choice of cappers (use menu below)
  • Free quartz insert included (or SiC for extra)

Heating Coil Specs:

  • 100W/120V coil
  • XLR 5-pin connector
  • K-type TC’s
  • Kevlar cord sheath is rip and shear resistant

$74.99

Availability: In stock (can be backordered)

(NOTE: Default is different for both coils and must match your controller!)
$0.00
Find Out From The Controller Seller, Check Out The Blog, Or Contact To Find Out The Proper Config. First!
$0.00
$0.00
  • Options Price: $0.00
  • Product Price: $74.99
  • Total: $0.00

Coil Wiring Order Is Important!

Your e-nail and/or coil may malfunction dangerously if the wiring order is not confirmed to match! Please pay attention to add on options for coil wiring order to match your setup.

Some controllers are wired differently (even though they look like they might match). If you are unsure, I can help you find out. Please check this out first for more info. before throwing any time and money away on incompatible gear!

Please first ask your controller seller if you don’t know for sure the wiring order on your gear. You want to do this before to make sure the setup will actually work. If for some reason you cannot get a response, ask me and I will see if we can figure it out together. When the wiring order of the coil and controller do not match, big problems occur! Your e-nail will probably not work and likely even malfunction if it does not match. It may look like the same size plug but some companies wire their enails differently to try to seem special and trick their customers.

Your Responsibilities

If you do not know for sure how your e-nail or coil is wired, it it is your responsibility to find out. Please make sure you at least try send a quick email or call the seller of your original setup. Many sellers are responsive when you ask them. Just ask what the wiring configuration is on the 5-pin XLR plug. That’s all! When you find it, please make sure it matches the listed configuration listed on this page (or select the custom wiring option).

Questions Always Welcome

If you have any questions please don’t hesitate to use the contact page and send a quick message. Here is a heat coil plug wiring guide, which is essential if you want to match different brands. If you are looking for more information specifically about which enail accessories check out the dab gear accessories guide to see what’s all involved in a full setup and starting at full potential.

Pin Fastened Banger Safety

The pin fastened banger is probably the most secure option to hold your banger up to your heat coil. Other options such as the bands are also very secure, but may not hold well onto bangers with certain neck shapes. The pin below the bucket ensures that you always have a tight coil fit on the bottom of the bucket. If you have any gaps, it’s very easy to bend the pin into a v-shape to tighten the holding force.

Back to the Lobby

If you have any questions don’t hesitate to use the contact page and send a quick message.

Back to the Lobby

Dab Gear Information for Newbies

Are you finding what you need?

how can I improve the site to be more helpful?

What would you like to see?

suggestions Are welcome!