Enail Set With Add On Options | Lagoon Creature

Enail Set With Add On Options | Lagoon Creature:

Here’s another exclusive drop 3D printed in Oregon, USA. The Lagoon Creature enail is as compact as it gets, but don’t underestimate it’s power to deliver monster dabs to your rig! Packed with industry standard electronics, this beast of a controller will keep chugging along for years to come.

Includes:

  • Compact e-nail controller & power cable
  • Choose your tools/accessories using the menu
  • (Attachable capper stands sold separately)

Features:

  • Keeps your nail heated consistently & conveniently within dabbing range
  • Designed, painted & assembled in the USA
  • High wattage electronics are protected with a “fast blow” fuse
  • Wiring on the plugs are: pin1=AC, pin2=AC, pin3=tc+, pin4=tc-, pin5=ground
  • Custom wiring order can be done for your heating coil if you already have one you want to use ($10.99).
  • Made of sustainable PLA plastic material which is a by-product of the sugar industry. PLA is recyclable and even semi-compostable (if buried in soil for a few years or so).
  • Controller dimensions are approximately: 5″ x 2.5″ x 2.5″
  • Free 2-yearwarranty on each and every controller

$99.99

$0.00
$0.00
$0.00
$0.00
$0.00
$0.00
  • Options Price: $0.00
  • Product Price: $99.99
  • Total: $0.00

Care For 3D Printed Items

All 3D printed items must be handled with a reasonable level of care to avoid weakening and/or warping the structure. 3D FDM printing uses a layer-by-layer construction — as opposed to standard injection molding which has no layers but is one uniform piece. Any transport of 3D printed items requires sufficient padding and avoidance of stacking heavy objects on top of these items or around them without sufficient padding and/or bracing.

Please keep 3D printed items out of direct sunlight. Intense direct sunlight a very hot environment may result in slight warpage. Care should be taken to keep any 3D printed away from intense heat (over 90F) or the risk of warpage may increase after a few hours. In most cases the warpage is very slight and hardly noticeable; but I just wanted to give some caution regarding this.

Don’t hesitate to drop a line here if you have any questions or comments!

Back to the Lobby

Dab Gear and Enail Information

Are you finding what you need?

how can I improve the site to be more helpful?

What would you like to see?

suggestions Are welcome!