Open Barrel Coil (20mm)
Open Barrel Coil (20mm):
Your e-nail and/or coil may malfunction dangerously if the wiring order is not confirmed to match! Many e-nail controllers are wired differently (even though they look like they might match). If you are unsure, I can help you find out. Read this for more info.
- barrel style 20mm e-nail heat coil
- 150W/120V coil
- standard XLR 5-pin connector
- k-type TC’s
- kevlar cord sheath is rip and shear resistant
This is the wiring order of this coil: pin1=AC, pin2=AC, pin3=TC+, pin4=TC-, pin5=GND
If you don’t know for sure the wiring order on pins 1-5 of your gear please first ask your controller seller for the pin configuration to match to this coil before purchasing. If for some reason you cannot get a response, ask me and I will see if we can figure it out together! Your e-nail will probably not work and likely even malfunction if the wiring order of the coil and controller do not match! It may look like the same size plug but some companies wire their e-nails differently to try to get proprietary exclusivity. If you do not know for sure how your e-nail or coil is wired, it is solely your responsibility to find out how (click here). Most e-nail sellers are responsive when you ask them. Just ask what the wiring configuration is on the 5-pin XLR plug. When you find it, please make sure it matches the listed configuration listed here.
Out of stock
The barrel style 20mm heat coil is great for a more indirect heat (for extremely low temp #chronnoisseurs) and compatibility with other “dome-less” nails. By comparison, the flat coils are the most efficient at delivering heat directly to the dish’s bottom surface, where it is needed most, but barrel style coil will heat the side-walls slightly more than the bottom– which can lead to better flavor. A capper is highly recommended if going the #lowtemp route.
RCCtools has been designing and assembling top-shelf heady electric dab tools out of Portland, Oregon since early 2015, when medical cannabis was transitioned into legal recreational use here. If you have any questions don’t hesitate to use the contact page and send a quick message!