25mm Cotter Pin Banger Set w/ 90 Degree Neck (Banger, Coil, Insert, and Capper)
25mm Cotter Pin Banger Kit (Coil, Banger, Capper, Insert)
- Axial heat coil wraps around the bottom of the banger for direct heating
- Quartz banger (with cotter pin holder
- Fitted insert
- And choice of capper (select using menu)
- Capper selection (select using menu)
- Rig sold separately
Heat Coil Specs:
- 90 Degree Bend In Neck
- Important:The wiring order of the heating coil is: pin1=TC+, pin2=TC-, pin3=ground, pin4=AC load, pin5=AC load
- XLR 5-pin connector
- K-type TC’s
- Kevlar cord sheath for rip/shear resistance
- Banger has 25mm outer diameter
Availability: In stock (can be backordered)
Coil Wiring Order Is Important!
Your e-nail and/or coil may malfunction dangerously if the wiring order is not confirmed to match! Please pay attention to add on options for coil wiring order to match your setup.
Some controllers are wired differently (even though they look like they might match). If you are unsure, I can help you find out. Please check this out first for more info. before throwing any time and money away on incompatible gear!
Please first ask your controller seller if you don’t know for sure the wiring order on your gear. You want to do this before to make sure the setup will actually work. If for some reason you cannot get a response, ask me and I will see if we can figure it out together. When the wiring order of the coil and controller do not match, big problems occur! Your e-nail will probably not work and likely even malfunction if it does not match. It may look like the same size plug but some companies wire their enails differently to try to seem special and trick their customers.
If you do not know for sure how your e-nail or coil is wired, it it is your responsibility to find out. Please make sure you at least try send a quick email or call the seller of your original setup. Many sellers are responsive when you ask them. Just ask what the wiring configuration is on the 5-pin XLR plug. That’s all! When you find it, please make sure it matches the listed configuration listed on this page (or select the custom wiring option).
Questions Always Welcome
If you have any questions please don’t hesitate to use the contact page and send a quick message. Here is a heat coil plug wiring guide, which is essential if you want to match different brands. If you are looking for more information specifically about which enail accessories check out the dab gear accessories guide to see what’s all involved in a full setup and starting at full potential.
Pin Fastened Banger Safety
The pin fastened banger is probably the most secure option to hold your banger up to your heat coil. Other options such as the bands are also very secure, but may not hold well onto bangers with certain neck shapes. The pin below the bucket ensures that you always have a tight coil fit on the bottom of the bucket. If you have any gaps, it’s very easy to bend the pin into a v-shape to tighten the holding force.