American Made Enail: "Golden Dawn"
American Made Enail: “Golden Dawn”
An original, top-shelf, USA designed & assembled enail controller setup equipped with one of the fastest, safest, most reliable digital dab controllers available anywhere online.
- Choose your preferred banger size and heat coil to match
- Complimentary accessories available below such as a capper, inserts, etc.
- Unique paint finish makes each unit pop with it’s own individual design that cannot be duplicated
- Keeps your nail within a tight temperature range specific to different concentrate types
- Convenient and quick heating without the use of a butane or propane torch (read here about the many advantages of an e-nail over a torch)
- Safe, rugged, shock-resistant ABS plastic enclosure (same as LEGO material)
- High-wattage AC electronics are protected with a “fast-blow” fuse for safety
- RCCtools heady marble-ized e-nail controllers are designed, painted & assembled in the USA
- Controller dimensions are approximately: 5″ x 2.5″ x 2.5″
- 2-year warranty on each e-nail controller
- XLR output pin1=AC, pin2=AC, pin3=tc+, pin4=tc-, pin5=ground (where pin 1 starts at the 2-o’-clock position and 5 is at ten-o’-clock)
Availability: In stock
American Enail Controller
RCCtools offers the smallest, most reliable, and unique American enail design on the market. I designed the compact cases to be as small as possible while keeping the same safe and reliable electronics. The enclosure uses up minimal space and therefore leaves room for other products at the dab station. Reducing the extra cavities while keeping the most important functions and safety features keeps the unit safe and convenient. I’m working on an even smaller design to be 3D printed sometime in the near future! Shaving out the last little bit of space will make for an even smaller enail while retaining full capabilities and safety features. PID/SSR electronics still lead the pack as being the most reliable, efficient, trusted temperature controller.
Any American Manufacturers Left?
You’ll find Asian manufactures components in 99.9% of the electronics products available on the market. Some of the parts in this American enail however are designed and assembled enail are sourced from overseas. Due to the cost and difficulty of competitiveness in a tight economy, American manufactured electronics are simply not in the cards at this time. There are no factories left for some of these things. Plus, people are used to goods priced with Chinese labor. Sourcing 100% American made electronics is just not currently in the cards. Even Ford motors mostly sources their parts overseas, electronics and otherwise. Ford then assembles the parts into the final vehicle in their American factories. Apple designs all of their products in the USA. Apple also outsources and trusts most of their manufacturing to China.
Designed, Assembled, & Injection Molded in America
The ABS plastic enclosures were designed in Oregon and are molded in Florida. Oregon is where the assembling and wiring of electronics happens. I also paint all of the cases here, as well as cut and/or 3D print the custom figure versions. I ship out only after quality assurance and finishing touches are applied.Of course, most of the actual electronic circuit components originate from Asian factories. The heat coil, power cable, plugs, and PID LED screen all originate in China.
RCCtools offers all of the care of an American company at a foreign price point. A fast blowing fuse protects the circuit in case of excess power draw. No one else offers a smaller enail with the same quality of parts and attention. Some don’t even bother to add fuse protection for safety! I saw a picture of one literally just the other day where the ground wire was simply omitted! Safety concerns abound when cheap sellers cut corners.
Myths of Some American and Chinese Made Products
You may have heard a few common myths regarding both Chinese and American manufacturing. While Chinese goods may be of lower quality on average, this is normally either due to the amount of money changing hands or miscommunication. Some Chinese factories can and will produce quality goods for you if you are doing good business. The relationship is completely built upon communication and prospective advantages of cooperation. Therefore, the quality will partially depend on the quality of this business relationship in the eyes of the manufacturer. Often times the only consequence for either party is to continue or discontinue the business relationship.
Demand for an American Made Screen? Let Me Know!
I aim to offer an American CPU sometime in the future as small run circuit production methods develop. Small scale manufacturing methods make it easier and cheaper by the day to do custom jobs in-house. These technologies have made it more economically feasible to produce one’s own products in-house. Therefore, importing loses some advantage as time goes on. Declare your demand for a US-sourced computer by contacting me and letting me know. Options could become available much quicker with considerable demand. Some of you don’t really mind paying a few bucks more for the American made electronics. I understand that most of you really just need the cheapest and best option available. I will expedite plans if you let me know and some good customer feedback comes through. China has heat coils on lock; but robot labor will eventually level that playing field.
Responsive Customer Service
RCCtools is an American enail company, so you can rely on quick shipping and responsive customer service that can relate to your needs. You may be completely new to the world of electric dabbing devices. I offer assistance from someone that actually uses the products and knows your needs. Beginning dabbers sometimes get overwhelmed with so many add on options and accessories to choose from. That’s why I wrote up this quick dab accessories guide.Read it to get an idea of the main items that you need, want, or might plan to get in the future. I vetted some of the best deals and selection on imported functional glass, therefore allowing you to skip the guess work and quickly find the best of what’s available. I can typically ship within a few days compared to a few weeks.
Enail Color Options:
Choose any color set you like for your case and make a truly custom e nail setup tailored to your needs. Please input your colors at checkout and/or e-mail for more instructions. Allow 1-2 weeks max. for production time on custom options.
Your input is highly encouraged and if you have any questions or comments please don’t hesitate to drop a line.