#1 way to keep your dab rig from tipping over with an e-nail:
- Make sure your e-nail heating coil is rotated inwards back toward the dab rig rather than pointing away from the dab rig!
The “Tall Dropdown Glass Adapter Fitting” is especially great for keeping the center of gravity towards the rig which prevents smaller rigs from tipping over. Even with a standard dropdown this will make a HUGE difference! With the tall dropdown it works even better because the center of gravity is even closer inwards instead of extending out from the rig which some tend to do.
First place the nail and glass adapter into your dab rig so that the heater coil “handle” rests in between the mouthpiece and the glass adapter. This forms an abstract x-shape between the glass adapter and coil handle from your perspective and tbe e-nail heat coil cable is perfectly balancing the rig the opposite way from the direction that the glass adapter faces. This way the two parts balance each other out and even a small dab rig has no troubles staying upright with an e-nail heat coil– as long as the dropdown does not tend to slide around in the joint and is the right style for your rig.
If a longer drop-down glass adapter extends too far out from the rig, it may make the problem even worse. This could cause some frustrating issues or even a serious fire hazard! These longer dropdowns are really only suitable for mid-large size rigs with heavier bases. It goes without saying to be careful with electronic heating controllers that are powered on continuously so that the dab rig always stays safe and that connected cables are safe from being pulled on, tripped over, etc.,