E-Nail Nectar Collector Coil | 10mm

$34.99

E-Nail Nectar Collector Heat Coil –

YOUR E-NAIL WILL NOT WORK OR MAY EVEN MALFUNCTION DANGEROUSLY IF THE WIRING DOES NOT MATCH! Many e-nail controllers are wired differently (even though they have the same size plug). IF YOU ARE UNSURE ABOUT THE WIRING ON YOUR E-NAIL PLEASECONTACT FIRST TO MAKE SURE THIS COIL WILL MATCH!

  • 150W / 120V coil (will work on most controllers except a few very very cheap units)
  • (100W coil is available by request)
  • Standard XLR 5-pin connector
  • K-type TC’s
  • Kevlar cord sheath is rip and shear resistant
  • IF YOU ARE UNSURE ABOUT THE WIRING ON YOUR E-NAIL PLEASE CONTACT FIRST TO MAKE SURE THIS COIL WILL MATCH!Ask your controller seller for the pin configuration to match to this coil before purchasing:
    • XLR PIN configuration: pin1=AC, pin2=AC, pin3=TC+, pin4=TC-, pin5=GND

It may look like the same size plug but some companies wire their e-nails differently to try to get proprietary exclusivity. IT IS SOLELY YOUR RESPONSIBILITY TO MESSAGEIF YOU DO NOT KNOW YOUR CONTROLLER WIRING CONFIG. ALREADY. Most e-nail sellers are responsive when you ask them. Just ask what the wiring configuration is on the 5-pin XLR plug. When you find it, please make sure it matches the listed

In stock

$0.00
  • Options Price: $0.00
  • Product Price: $34.99
  • Total: $0.00

An e-nail nectar collector coil (AKA e-nectar) is one way to keep steady heat on your nectar collector / dab straw / honey straw’s nail. This allows you to give it steady, even heat without any guess-work or glowing red-hot nails involved. While I have to admit – as a pyro – I do enjoy using a torch, and I like how it also invokes the sense of blowing glass or other industrial work, you just can’t beat the everyday value that an electrically-controlled nail brings to the table. Also the even-heating from something like this e-nail nectar collector coil is MUCH much easier on the nail! You don’t have to heat it up until it gets glowing red anymore– which saves on wear from thermal shock and oxidation. This might not matter as much to you if you are using the entry-level universal Ti or a cheap quartz dome-less; but anything above that is worth taking care of if you plan on using it a fair amount!

 

COMPANY INFO:RCC TOOLS has been hard at work designing and assembling top-shelf heady electric dab nail tools out of Portland, Oregon since early 2015, when cannabis was first legalized for recreational use. All products on this site are intended for legal use only, by adults of legal age for intended usage. E-nail products are not intended for anyone under the age of 18 to use– for fire hazard concerns.

 

HOME

Additional information

Weight4 oz
Dimensions8 × 6 × 1 in