20mm Axial E-Banger Set

$54.99

20mm Axial E-Banger Set-

(***HEAT COIL WIRING NEEDS TO MATCH YOUR CONTROLLER– PIN1=AC PIN2=AC PIN3=TC+ PIN4=TC- PIN5=GND)

  • Includes specialized heat coil (bottom-heat), banger nail, & custom heat coil clip
  • 20mm axial barrel style banger heat coil with wraps on the bottom of the coil for direct lower surface heating
  • 150W / 120V coil (will work on most controllers except a few very very cheap units)
  • (100W coil is available by request)
  • Standard XLR 5-pin connector
  • K-type TC’s
  • Kevlar cord sheath is rip and shear resistant
  • IF YOU ARE UNSURE ABOUT THE WIRING ON YOUR E-NAIL PLEASE CONTACT FIRST TO MAKE SURE THIS COIL WILL MATCH!

    Ask your controller seller for the pin configuration to match to this coil before purchasing:

    • XLR PIN configuration: pin1=AC, pin2=AC, pin3=TC+, pin4=TC-, pin5=GND

In stock

$0.00
$0.00
  • Options Price: $0.00
  • Product Price: $54.99
  • Total: $0.00

Flat Coil Vs. Barrel Style Coil:

A barrel style e-nail heat coil is great for nails that are designed to hold the heat coil around the outer walls of the nail. Even with bangers some prefer that the heat is more indirect than with the specialized banger coil– for extremely low temp “chronnoisseurs”. Also the barrel style coil shares compatibility with many base-price “domeless” nails. By comparison, the flat coils are the most efficient at delivering heat directly to the bottom surface of a quartz or SiC dish, where it is directly transferred to the concentrate. On the other hand, a barrel style coil will heat the side-walls slightly more than the bottom– which can produce a lighter dab that will most often leave a larger pool. This could be considered wasteful but there is the advantage of being able to q-tip the banger almost completely clean before the dab has a change to dry and become a crust– chazzing up the nail. I am somewhere in between because I resent waste but push it to the limits of what can be cleaned with minimal effort.

A carb cap is necessart if going the #lowtempdab route and  highly recommended if going the #hightempdabs route!

If you have any questions don’t hesitate to use the contact page and send a quick message…

HOME

Additional information

Dimensions8 × 6 × 1 in
Wiring

Standard XLR Wiring (PIN1=AC POWER, PIN2=AC POWER, PIN3=TC+, PIN4=TC-, PIN5=GROUND), "Custom" XLR Wiring