TARDIS Custom E-Nail


Keep those pesky Daleks at bay with an original, top-shelf,USA designed & assembled custom TARDIS Dr. Who e-nail. Just like the signature marble-ized e-nails, this “Bad Wolf” is equipped with some of the fastest, safest, steadiest, and most reliable PID & SSR technology.

For those WHO are unfamiliar, TARDIS is an acronym from the show ‘Dr. Who’ that stands for “Time and Relative Dimension In Space”. It is the name of the key vessel that brings the Dr. through various times and places in the show. If you haven’t seen the show, you have plenty of binge watching to do– episodes run all the way back to the 60’s (great for binge watching, if you have the time)! It’s a thought-provoking, heart-filled, mind-expanding sci-fi extravaganza that is a sure-shot recommendation for pretty much all ages and genders!


Dimensions are approx. 10.5″ x 5.5″ x 5.5″ but it’s a lot bigger on the inside than on the outside 😉

  • Original custom TARDIS Dr. Who e-nail
  • High-amperage electronics are fuse-protected for safety in this controller!
  • Heats safely and reliably to 650F within 2 minutes (max. recommended temperature is 1100F for cleaning)
  • Standard XLR output so you can easily replace your coil down-the-line
  • Assembled in the USA
  • Free 12-month warranty on the TARDIS controller

XLR heating coil pin configuration: pin1=AC, pin2=AC, pin3=tc+, pin4=tc-, pin5=ground (where pin 1 starts at the 2-o’-clock position and 5 is at ten-o’-clock)







Take a trip in time and space with the TARDIS custom e-nail– another RCC TOOLS original. What sets RCC TOOLS apart from other e-nail control box sellers? Here are just a few reasons: “WHAT SETS RCC TOOLS APART?

Additional information

Attachment Options

No Attachments – controller & power cord ONLY, controller + 20mm heating coil, + 20mm heating coil and Ti nail, + 20mm heating coil and 14mm quartz female nail, + 20mm heating coil and 14mm quartz male nail