Sale!

Homer Simpson Custom E-Nail

$128.99$179.99

MMMmmm, terpss ::drooling:: sez Homer

An original, top-shelf, USA designed & assembled custom Homer Simpson e-nail. Just like the signature marble-ized e-nails, this “Bad Wolf” is equipped with some of the fastest, safest, steadiest, and most reliable PID & SSR technology.

Dimensions are approx. 10.5″ x 5.5″ x 5.5″ but it’s a lot bigger on the inside than on the outside 😉

  • Original custom e-nail
  • High-amperage electronics are fuse-protected for safety in this controller!
  • Heats safely and reliably to 650F within 2 minutes (max. recommended temperature is 1100F for cleaning)
  • Standard XLR output so you can easily replace your coil down-the-line
  • MINIMAL OVERSHOOT AND STEADY TEMP CONTROL!
  • Assembled in the USA
  • Free 12-month warranty on the TARDIS controller

XLR heating coil pin configuration: pin1=AC, pin2=AC, pin3=tc+, pin4=tc-, pin5=ground (where pin 1 starts at the 2-o’-clock position and 5 is at ten-o’-clock)

 

INSTRUCTION MANUAL & LEGAL INFO.

 GENERAL E-NAIL INFO.

HOME

 

Clear

Sesh with the Homer nail– another RCC TOOLS original. What sets RCC TOOLS apart from other e-nail stores? Here are just a few reasons: “WHAT SETS RCC TOOLS APART?

Additional information

Attachment Options

No Attachments – controller & power cord ONLY, controller + 20mm heating coil, + 20mm heating coil and Ti nail, + 20mm heating coil and 14mm quartz female nail, + 20mm heating coil and 14mm quartz male nail